YSE Series Soft Start Brake Motor (R3-140P)

Short Description:

YSE-140P
Power-off brake motor: its straight disc flow brake is installed on the end cover of the non-shaft extension end of the motor. Conditions of use: the altitude should not exceed 1000 meters, the maximum ambient temperature should not exceed 40°C, and the minimum should not be lower than -15°C.
A new type of brake motor specially designed according to the working needs of the crane, suitable for: electric single girder, hoist double girder, gantry crane-large/trolley, s


Product Detail

Product Tags

 Product Description

The working principle of YSE series soft start brake motor (III generation) is that when the motor is connected to the power supply, the rectifier of the brake is connected to the power supply at the same time. When the cover is disengaged, the motor runs; when the power supply is cut off, the brake electromagnet loses its electromagnetic attraction, and the spring force pushes the armature to press the brake disc. Under the action of the friction torque, the motor stops running immediately.

This series of motor junction boxes are installed on the top of the motor, and the distance between the motor installation holes is the same. According to the installation requirements, the motor can be installed in a direction of 2~180°.

This series of motors has greatly reduced noise and vibration, and reached the advanced level. It is equipped with high-performance protection grade (IP54), which improves the insulation grade of the motor and increases the service life of the motor;

The design of this series of motors pays special attention to the appearance and appearance. The vertical and horizontal distribution of the heat dissipation ribs of the machine base, the end cover and the wiring hood are all improved designs, and the appearance is particularly beautiful.

Product Advantage

1. Flexible outgoing line direction
The motor junction box is installed on the top of the motor, with the same installation hole spacing. According to installation requirements, the motor can be rotated 2 * 180 ° for installation.

2. Beautiful motor design
The heat dissipation ribs of the base are designed to be vertically and horizontally distributed, and the end cover, junction box, and fan cover are all improved in design, with a unique and beautiful appearance.

3. Superior motor performance

4. Low noise, low vibration
Through design and process improvements, the YSE series 3rd generation motors have significantly reduced noise and vibration.
 

 

 

Standard Type Power(D.KW) Blocking Torque(D.N.M) Stall current(D.A) Rated Speed(r/min) Brake Torque(N.M) Flange Plate(Φ) Mounting Port(Φ)
Synchronous speed 15000r/min
YSE 71-4P 0.4 4 2.8 1200 1-3 140P Φ100
0.5 5 3 1200
0.8 8 3.6 1200
YSE 80-4P 0.4 4 2.8 1200 1-5 140P Φ100
0.8 8 3.6 1200
1.1 12 6.2 1200
1.5 16 7.5 1200
Note: The above is the standard configuration for driving. If you have special working conditions, please select it separately. Level 6, Level 8, Level 12
select configuration hard boot High Power Different voltage frequency conversion special gear Variable speedmulti-speed Non-standard Encoder

  • Previous:
  • Next:

  • Write your message here and send it to us